Product Number: 9890800
Make Testing Easier, Reproducible, and Accurate with QBD1200+ Total Organic Carbon Analyzer
Hach QBD1200+ is a laboratory TOC analyzer that supports a wide range of TOC measurements from ultrapure and pharmaceutical water to cleaning validation.
Rely on Data for TOC Testing
The QBD1200+ virtually eliminates sample-to-sample carryover, ensuring excellent reproducibility and stability. Its dynamic endpoint detection technology ensures full oxidation of organic matter and removal of inorganic carbon. With a digital NDIR detector for long-term stability, it is effective for purified water, injection water, and cleaning validation up to 100 ppm.
Simplify Analysis
Ready for use within an hour of unpacking, the QBD1200+ requires no external PC, ensuring 21 CFR 11 compliance. The 10.4-inch color touchscreen provides an intuitive user interface, with automated calibrations, system suitability testing, and report generation. Its automatic adjustment range and dilution function mean unknown sample concentrations are not a problem, and one reagent ensures high performance for all tests.
The QBD1200+ addresses common issues in TOC measurement by reducing preparation time, measurement time, and reagent costs, ensuring stable and accurate TOC values. Calibration is easier and less risky, enhancing testing efficiency and effectiveness. This lab TOC analyzer is a valuable tool for precise and efficient TOC analysis in laboratories and industries.
With high accuracy and reproducibility across three stations, the QBD1200+ reduces operating costs, supports data integrity without a management PC, and offers quick startup and smooth daily inspections with its compact design.
Benefits
Reduced service calls from monthly to yearly and low reagent costs ensure a low cost of ownership. Automatic calibration takes just two hours, and the reaction chamber is flushed after each measurement, allowing the measurement of out-of-limit samples without special maintenance. The QBD1200+ performs a self-health check after powering on, with multiple sensors ensuring reliable measurements.
QBD1200+ can measure TOC with high precision and reproducibility from ultrapure water of less than 1 ppm to TOC of raw water up to 100 ppm.
QBD1200+ can be operated stably with only an annual inspection. There is no need to calibrate the calibration curve, which has been routinely performed in the past. Running costs can be reduced with low reagent costs and simple maintenance work.
The QBD1200+ allows configuration and report data management without a PC. Anyone can easily set up the operation of the TOC meter, and it excels in data integrity measures.
In the case of a general TOC analyzer, it takes 2 to 3 hours for preparation before measurement, including startup, daily inspection, line cleaning, calibration curve test, and system suitability test. However, Hach Ultra's QBD1200+ only needs to perform a daily inspection called a background test that only confirms that the TOC value of the oxidant reagent is less than 100 ppb because of its fast start-up responsiveness. It is possible to start measurement in minutes, which greatly reduces the tester's process.
The QBD1200+ has a compact design that makes it easy to install in the lab.
QBD1200+ body: 320 mm (W) x 507 mm (D) x 410 mm (H)
Autosampler: 366 mm (W) x 537 mm (D) x 457 mm (H)
*when applicable
Phase Out
Items with this label are at the end of their life cycle and may become obsolete in the future.
Obsolete
Items with this label are obsolete and unavailable through eCommerce.
If applicable, please view Replacement Product above or contact Hach Customer Service for further assistance.
