Aerial view of multiple municipal wastewater treatment tanks

Ammonia/Ammonium

What’s the difference between ammonia and ammonium?

Ammonia and ammonium are both compounds that contain hydrogen and nitrogen. Ammonia has one nitrogen atom and three hydrogen atoms (NH3), and ammonium has one nitrogen atom and four hydrogen atoms (NH4).

This small difference in hydrogen makes a big difference in the compounds. While ammonia has a pungent smell and can be harmful to aquatic organisms, ammonium is both odorless and harmless.

Due to the various potential risks of excessive ammonia in water, it is important to have dependable, simple ammonia testing solutions. Despite its relative harmless, ammonium also needs to be accurately monitored in order to have a thorough understanding of water quality in lakes, rivers and water treatment facilities.

Hach® offers a variety of ammonia analyzers, test kits, reagents and more to help you easily and accurately measure ammonia and ammonium in a variety of applications.

Featured Ammonia and Ammonium Products

Online Ammonia Analyzers and Reagents

Ammonia Analyzer

The 5500sc Ammonia Monochloramine Analyzer is an easy-to-operate, low-maintenance solution that continuously monitors all of the relevant parameters to give you total confidence in your chloramination process.

View Products

Online Ammonium Analyzers and Reagents

Ammonium Analyzer

Designed for easy outdoor installation, the Amtax Ammonium Analyzer is available in four measurement ranges for a variety of wastewater and drinking water applications. Get high quality results with short response time.

View Products

Laboratory Ammonia and Ammonium Meters

LPV440

Get fast and reliable measurement of ammonia and ammonium with Hach’s line of lab meters. These versatile instruments also have you covered on a wide range of water quality parameters including chloride, pH and TDS.

View Products

Portable Ammonia Meter

Ammonium Portable

With its rugged, waterproof design, the DR300 Pocket Colorimeter for ammonia and nitrogen provides dependable, accurate measurements even in theharshest of field conditions.

View Products

Sensors and Controllers

Ammonia and Ammonium Sensors and Controllers

Available for an array of applications, Hach sensors and controllers ensure consistently accurate measurement of ammonia and ammonium.

View Products

Ammonia and Ammonium Test Kits and Strips

Test Kit

Easy to use and read, Hach test kits and strips make it simple to get accurate results in either the lab or the field.

View Products

Why Monitor and Measure Ammonia?

Ammonia is used as both a reagent and as a measurement parameter in several areas of water and wastewater treatment.

  • Naturally occurring ammonia is monitored in source water.
  • During the chloramination disinfection process, ammonia is combined with chlorine to treat drinking water and maintain a longer-lasting residual in distribution systems.
  • Sometimes ammonia is used for pH control, such as in the pharmaceutical industry.
  • Ammonia is widely monitored in wastewater nitrification and denitrification processes.

While generally harmless at low concentrations, high concentrations of ammonia can cause damage and pose health risks. Therefore, ammonia levels must be properly monitored and maintained.

At Hach®, find the testing equipment, resources, training and software you need to successfully monitor and manage ammonia levels in your specific process application.

The 5500sc Ammonia Monochloramine Analyzer provides information needed to eliminate nitrification events

Which Processes Require Ammonia Monitoring?

Gaseous ammonia and its concentrated solutions must be handled with care and in accordance with OSHA (or other relevant regulatory agency’s) requirements. This is due to highly corrosive properties that pose serious health risks ranging from mild eye or skin irritation to chemical burning, depending on the concentration. Additionally, off-gassing ammonia can cause aesthetic problems like objectionable taste or odor.

When ammonia is not used for disinfection, its presence in a distribution system may indicate leaching from materials used in the pipework construction or water contamination, due to damage in the system. When unwanted ammonia combines with chlorine, it diminishes the disinfection strength of chlorination.

Chloramination

In some disinfection processes, ammonia is intentionally combined with chlorine to produce monochloramine. Though free chorine is a more powerful disinfectant, monochloramine (bonded ammonia and chlorine) has a stronger residual so it remains in the distribution system longer, thus ensuring disinfection is maintained all the way to the tap. Furthermore, chloramines react less intensely with various impurities in raw water, particularly organic substances, thus minimizing the formation of some carcinogenic disinfection by-products (DBP). To optimize the chloramination process, it is important to monitor the formation of the target disinfectant species, while preventing the formation of less desirable dichloramine or trichloramine (nitrogen trichloride). Monochloramine testing is used together with a free ammonia determination to ensure formation of the right disinfectant and reduce raw material costs by preventing the overfeeding of chlorine and/or ammonia.

Learn more about chloramination.

Free Ammonia

Ammonia that has not bonded with chlorine during chloramination disinfection is referred to as free ammonia (both NH4+ and NH3). At a neutral pH and ambient temperature, almost all free ammonia exists as NH4+. As the pH and temperature increase, the amount of NH3 increases and the amount of NH4+ decreases. When chloraminated water is released, free ammonia levels increase as monochloramine reacts with various organics and bacteria in the distribution system water, satisfying the chlorine demand. Increased free ammonia levels indicate the onset of nitrification. A sudden drop in free ammonia suggests that nitrification is in process and nitrite is being formed. The free ammonia value is useful in determining the amount of free chlorine needed to increase the monochloramine residual at a booster station. The free ammonia level can be reduced by adding free chlorine at a ratio of 5:1 as Cl2:N to guide the process and help minimize nitrification potential.

Total Ammonia

Total ammonia is the sum of all ammonia nitrogen present in the form of monochloramine (NH2Cl), other chloramines, ammonium ion (NH4+), and molecular ammonia (NH3). This parameter may serve as a primary or secondary verification to maintain the chloramination process under control.

View Products

A glass of drinking water highlights the importance of monitoring ammonia in drinking water as it can cause issues of health, odor and taste.

Chlorine canisters are stacked for use in a drinking water plant.

How is Ammonia Monitored?

Salicylate Method

The salicylate method is a variation of the well-known phenate method, but it has an advantage of being free from mercury salts and phenol. This method is most useful for low range ammonia nitrogen determinations. Although the procedure involves multiple steps before a final green color is developed, all reagents are contained in convenient powder pillows (salicylate reagent powder pillows and alkaline cyanurate powder pillows) or a combination of powder pillows and TNT vials.

  1. Ammonia compounds react with hypochlorite to form monochloramine.
  2. The monochloramine then reacts with salicylate to form 5-aminosalicylate.
  3. Oxidation of 5-aminosalicylate is carried out in the presence of a catalyst, nitroprusside (also called nitroferricyanide), which results in the formation of indosalicylate, a blue-colored compound. The blue color is masked by the yellow color (from excess nitroprusside) causing a green-colored solution. The intensity of the resulting green color is directly proportional to the ammonia concentration in the sample.

Wastewater or Environmental Waters

Chloramination

Gas Sensing Probe

The ammonia electrode measures ammonia gas in aqueous solutions, or ammonium ions that have been converted to gas by the addition of a strong base. The electrode is a complete electrochemical cell consisting of a glass pH electrode and a reference electrode. The gas-permeable membrane separates the sample from a thin layer of electrolyte that is pressed between the pH bulb and the membrane. At high pH, ammonium ion is converted to ammonia gas. The gas diffuses through the membrane and causes a pH change in the thin layer of electrolyte. The potential across the pH glass changes as a result of the pH change and the electrode measures the change in potential. The measured pH change is proportional to the ammonia concentration in the solution.

Nessler Method

In this ammonia test, Nessler reagent (K2HgI4) reacts with the ammonia present in the sample (under strongly alkaline conditions) to produce a yellow-colored species. The intensity of the color is in direct proportion to the ammonia concentration.

2K2HgI4 + NH3 + 3KOH → Hg2OINH2 + 7KI + 2H2O

Frequently Asked Questions

View Products and Services

Your selection

  • Ammonia
  • Ammonia Monochloramine
  • Ammonia-Free
  • Ammonia-Free and Total
  • Ammonium

Market Class

Parameter

Product Type

Product Sub-Type

Application

Topic

Topic Detail

Method/Technology

Method Number

Location

Industry

Loading

Have Questions? We Have Answers!

Contact us for tech support, service, sales, or to get a quote.